Music Store Live is proud to present this PRS CAD Dallas Derek Trucks Mod 50 6L6 4x10! If you've watched any of our demos you've likely already heard this beauty and what it can do. We LOVE this amp so much that we've waited to sell it until we got to showcase it as our number one go-to demo amp. This amp is undeniable proof that PRS makes incredible, life-changing tone machines in the form of amplifiers. This amp is able to provide sterling clean tube chime as well as the most singing sustaining lead tone you could hope for. On top of that, it couldn't be easier to dial in. On top of THAT the spring reverb is just perfect. You can get a terrific lead sound at low volume and you can crank it up to big stage volume. Even order harmonics spill forth from this combo in such a lovely bouquet it's enough to get you all teary eyed ( if killer tube tone is your thing that is ). We can't think of anything that sounds better than this. Take a listen to a PRS Mira getting demoed into the amp in the clip below. There are no effects or post production compression or reverb whatsoever being used at any time. Just the guitar plugged into the amp with an AT4040 mic in front of it.
The Custom Audio Designed ( CAD ) amps from Paul Reed Smith continue to impress top shelf players. PRS Amp Designer Doug Sewell is doing amazing things and we look forward to offering more amps like this. After many many rounds of tweaks, Doug Sewell produced this 50 watt Dallas combo. Not usually available in a 4 x 10 cabinet, this amp features hand written on the back serial plate in gold "Derek Trucks Mods". It should come as no surprise that this amp sounds extremely close to Derek Trucks' coveted Super Reverb. One big difference between the two, however, is that this is a single channel amp. The controls are as follows : Volume, Treble, Middle, Low, Master and there is a bright switch which lets you excite the high end of your signal to really cut through. This amp runs on a set of 6L6 power tubes. It features spring reverb and a rear mounted bias control. It also features two 4 ohm outputs, two 8 ohm outputs and a single 16 ohm output for different external cabinet situations. Inside the open back cab sits four 10" Celestion Greenback 30 watt speakers. All of these featured combine to yield an extraordinary custom amp. NOTE : One more terrific thing about this amp? It does not weigh nearly as much as a Super Reverb so you can look forward to lugging it to gigs without spending the next day icing your back ; )
This 2012 PRS CAD Dallas 4x10 50 watt combo is in pristine mint condition, used for demo purposes only.